ViplexViplyLamparquetParquet trayBordersOutdoorMarine
Viro Floor Home
About us
Engineered Flooring
Products
Designs
Gallery
Installation
Contact us
 

Outdoor:

 Pre-finished Natural Wood tiles designed & treated carefully for the outdoor usage  

Industrial Composition of the product

Outdoor tiles are composed of two layers plus coating layer

•  The upper layer from hard Teak or Iroko wood strips with 15 mm thickness
•  The lower layer is a 15 mm thick Polypropylene base with balanced equilibrium.

Coating:

•  The wood is treated (VAC-VAC impregnation) with an English origin special solution that penetrates the wood to a depth of 4 mm from all surfaces to form an anti-fungal, anti-insect and anti moisture film that protects the wood from any natural danger.

Afterwards the wood strips are to be coated with natural origin oil suitable for treating any wooden surface, in- or out-doors forming a hardwearing oily protection, not sticky, easy to buff up and preserve over time.

This natural oil does not form a surface film or flake or even peel, also easy to reapply without the need to sand down the wood. With excellent resistance to weather, its components remain inside the wood to protect it and are non-toxic, easily applied with a brush.

 

 

•  Oil specs.

Form: Liquid

Flash point: >62

Density: 0.82

Fire class: III - 1

Explosion Limits: 0.7 - 5

Weight % organic solvents: 67

VOC content (grams / liter): 549

 

Fixing wood to the base :

The wooden strips are screw-nailed to the grid base with a simple yet efficient method without using any chemical or natural glue.


Technical Specs.

•  Tiles size in mm

Length

Width

Thickness

300 mm

300 mm

30 mm

•  The surface layer is formaldehyde-free with no carcinogenic or allergenic materials
•  Humidity ratio from 10 - 12 %


•  Wood Characteristics (teak):

grain: visible

weaving: definitely fine

appearance: greasy

fiber: regular but also wavy

resistance to changes: elevated

resistance to collision: average

volume weight: average in a humidity of approx. 12% corresponding to approx. 650 kg/m³

average resistance to axial compression: approx. 550 kp/cm²

average resistance to flexion: approx. 1200 kp/cm²

average module of elasticity: 110.000 kp/cm²

flexibility: low

hardness: average

nerve: low



•  Wood Characteristics (Iroko):

grain: just perceptible

weaving: average-coarse

appearance: greasy

fiber: wavy-interwoven

resistance to changes: good

resistance to collision: fairly good

volume weight: average in humidity around 12% corresponding to approx. 650 kg/m³

average resistance to axial compression: approx. 560 kp/cm²

average resistance to flexion: approx. 1200 kp/cm²

average module of elasticity: 107.000 kp/cm ²

flexibility: average

hardness: average

nerve: average - low

 

•  Installation Methods:

Installing our product is easy and quick, not only for professionals but also for DIY enthusiasts. The only tools you need are a hammer, a handsaw, a screwdriver, and measuring tape.

Floating installation is done on any pre-existing surface, thanks to the patented support grid. Our product supports various layouts and allows the creation of geometric motifs as you desire

The tiles are installed side by side using the click locking system:

1. Place the male part on top of the female part and click down.

2. Lift the tile on the male side and insert the female part from the underneath until you hear they click together.

 

 

(C) Copyrights 2004, Virofloor.com, All rights Reserved Design by: PYLON