|
Parquetry:
Pre-finished Natural Wood Parquet tiles with high quality & marvelous designs Industrial Composition of the product
 Parquet tiles are composed of two layers plus coating layer
• The upper layer from hard African or European wood with 4 - 6 mm thickness
• The lower layer from birch plywood with 12 mm thickness
Coating:
5 layers of European U.V Acrylic coating material with high resistance towards friction & corrosion
Glue used in Production:
European PVA-D3 Glue is used in the production phases complying with all the European Industrial & environmental Specs.
Technical Specs.
• Tiles size in mm
Length |
Width |
Thickness |
According to design |
According to design |
16 - 18 mm |
• The surface layer is formaldehyde-free with no carcinogenic or allergenic materials
• Can be re-sanded & coated several times
• Humidity ratio from 8 - 10 %
• The Following table states the Tech. Specs. according to the standard tests:
Test |
Spec. |
Grade |
Chemical resistance |
DIN 68861 TL1 |
1 B |
Flammability Degree |
DIN 4102 |
B 1 |
Friction resistance |
ASTM 1.000g weight CS 17 stone |
14000 cycle |
Scratching resistance |
DIN 68861 TL4 |
4 B |
Thermal Test |
EN 12722 |
120 C° |
Longitudinal cut test |
DIN 53151 |
GT0 |
Cigarettes test |
DIN 68861 TL6 |
6 C |
 
• Mechanical properties of the wood used in our products :
| Property |
TEAK |
IROKO |
APA |
AKO |
AYUI |
ASH |
BEECH |
| Bending STRENGTH "kg/cm ²" |
1161 |
896 |
1211 |
516 |
870 |
1224 |
1091 |
| MAX. CRUSHING STRENGTH "kg/cm ²" |
629 |
573 |
777 |
349 |
513 |
523 |
534 |
| STIFFENES "1000 kg/cm ²" |
191 |
124 |
135 |
71 |
121 |
129 |
130 |
| SHEARING "kg/cm ²" |
107 |
109 |
149 |
81 |
104 |
149 |
141 |
| SP.GRAVITY |
0.75 |
0.78 |
0.82 |
0.43 |
0.52 |
0.71 |
0.66 |
| DENSITY " kg/m ³" |
786 |
674 |
819 |
433 |
626 |
688 |
--- |
| IMPACT STRENGTH "cm" |
91 |
58 |
79 |
36 |
--- |
106 |
105 |
• Some Materials Effect on the tiles according to DIN 628861 PART1 Specs. :
Material |
Test time |
Result |
Tea/Coffee |
16 hours |
No effect |
Vinegar / acetone |
16 hours |
No effect |
Sodium Carbonates |
16 hours |
No effect |
Ethyl Alcohol |
16 hours |
No effect |
Cola |
16 hours |
No effect |
Butter/Onion |
16 hours |
No effect |
Mustard |
16 hours |
No effect |
Fuel |
16 hours |
No effect |
Black Ink |
16 hours |
3 units |
Soap |
16 hours |
No effect |
 • Installation Methods:
Parquet tiles can be applied to any Flat surface (Tiles - Ceramic - Wood - Flat Surfaced Concrete)
• Floating System :
Where the tiles are directly installed over a layer of poly ethylene with 2 mm thickness while using the PVA-D3 glue on the tiles' tongues.
This method is preferred for all the other methods.
• Viro Floor Method:
Since our product is composed of natural wood, It could be installed on thin softwood strips of 8 mm thickness with 2 layers of poly ethylene above and under the strips to protect those strips & the tiles against humidity.
This method is preferred for its good sound resistance plus its humidity resistance.
• Glue down method :
Where the Tiles are directly glued to any flat floor using polymer-based glues made specially to glue wooden floors to any flat surface.
|
