Call Us: 010 2505 1508

Parquetry


Pre-finished Natural Wood Parquet tiles with high quality & marvelous designs Industrial Composition of the product

Parquet tiles are composed of two layers plus coating layer

⦁ The upper layer from hard African or European wood with 4 - 6 mm thickness.

⦁ The lower layer from birch plywood with 12 mm thickness.

Coating:

5 layers of European U.V Acrylic coating material with high resistance towards friction & corrosion.

Glue used in Production:

European PVA-D3 Glue is used in the production phases complying with all the European Industrial & environmental Specs.

Technical Specs

Tiles size in mm

Length Width Thickness
According to design According to design 16 - 18 mm

⦁ The surface layer is formaldehyde-free with no carcinogenic or allergenic materials.

⦁ Can be re-sanded & coated several times.

⦁ Humidity ratio from 8 - 10 %.


The Following table states the Tech. Specs. according to the standard tests:

Test Spec. Grade
Chemical resistance DIN 68861 TL1 1 B
Flammability Degree DIN 4102 B 1
Friction resistance ASTM 1.000g weight CS 17 stone 14000 cycle
Scratching resistance DIN 68861 TL4 4 B
Thermal Test EN 12722 120 C°
Longitudinal cut test DIN 53151 GT0
Cigarettes test DIN 68861 TL6 6 C

Mechanical properties of the wood used in our products :

Property TEAK IROKO APA AKO AYUI ASH BEECH
Bending strength ( kg/cm² ) 1161 896 1211 516 870 1224 1091
Max. crushing strength ( kg/cm² ) 629 573 777 349 513 523 534
Stiffenes ( 1000 kg/cm² ) 191 124 135 71 121 129 130
Shearing ( kg/cm² ) 107 109 149 81 104 149 141
SP. Gravity 0.75 0.78 0.82 0.43 0.52 0.71 0.66
Density ( kg/m³ ) 786 674 819 433 626 688 ---
Impact Strenght ( cm ) 91 58 79 36 --- 106 105

Some Materials Effect on Viplex according to DIN 628861 PART1 Specs. :

Material Test time Result
Tea/Coffee 16 hours No effect
Vinegar / acetone 16 hours No effect
Sodium Carbonates 16 hours No effect
Ethyl Alcohol 16 hours No effect
Cola 16 hours No effect
Butter/Onion 16 hours No effect
Mustard 16 hours No effect
Fuel 16 hours No effect
Black Ink 16 hours 3 units
Soap 16 hours No effect

Installation Methods:

Parquet tiles can be applied to any Flat surface (Tiles - Ceramic - Wood - Flat Surfaced Concrete)


Floating System :

Where the tiles are directly installed over a layer of poly ethylene with 2 mm thickness while using the PVA-D3 glue on the tiles' tongues. This method is preferred for all the other methods.

Viro Floor Method:

Since our product is composed of natural wood, It could be installed on thin softwood strips of 8 mm thickness with 2 layers of poly ethylene above and under the strips to protect those strips & the tiles against humidity. This method is preferred for its good sound resistance plus its humidity resistance.

Glue down method :

Where the Tiles are directly glued to any flat floor using polymer-based glues made specially to glue wooden floors to any flat surface.

Get in touch with us